A guy in Meridian called us last spring, about six hours into a Saturday he'd spent fighting a 10x12 wood shed with a reciprocating saw. He had one wall down, a rotted floor, the roof still up, and a sore back. Most shed demolition calls we get start about like that.

Two weeks later we pulled a metal shed out of a backyard in Nampa in roughly forty minutes.

Same job on paper. Very different day. If you're collecting quotes around the Boise area, the biggest thing moving that number is what your shed is built out of.

Why wood shed demolition takes so long

A wood shed is a small building. Framed, sheathed, roofed, and held together by a few hundred nails that have been sitting in Idaho weather for twenty years.

You can't just push it over. Well, you can. Then you've got a tangled pile with nails pointing up in every direction, and you still have to cut it down small enough to load. Knocking it over isn't the work. Breaking it apart is.

We go in layers. Shingles and roof sheathing, then rafters, then walls one at a time, then the floor. On a normal 8x10 or 10x12, figure an hour and a half to three hours with two guys.

The floor is where wood sheds get ugly. If it sat on skids on bare dirt, the joists are usually soft and the plywood doesn't come up in sheets. It comes up in chunks, one shovel of damp particle board at a time.

And almost all of it heads to the landfill. Old T1-11 siding, asphalt shingles, painted trim: none of that gets recycled in any real way around here. It goes to Hidden Hollow and you pay by the ton.

Metal sheds come apart fast, and they bite

Those steel kit sheds, the ones that showed up in a flat box from a big-box store and ate a whole weekend to assemble, come apart about the way they went together. Only quicker.

Roof panels first. Then walls. Then the frame. On a 10x12 metal shed we're often loaded and pulling out of the driveway inside an hour.

The catch is that thin galvanized steel is sharp. Every panel edge is a cut waiting to happen, and one good gust can turn a loose panel into something you really don't want to be holding. That's the actual risk on a metal shed. Not weight, not collapse. Just sheet metal behaving badly.

Tip: Taking a metal shed apart yourself? Pull the roof panels before you touch the walls. Those kits get all their rigidity from the roof, so if you start unbolting walls first the whole thing racks sideways on you. That's how people end up with a folded shed and a bent door track they can't get past.

Metal does have one thing going for it: scrap value. Clean steel goes to Western Recycling instead of costing us tipping fees. That doesn't make the job free, but it's a big part of why a metal teardown prices under a wood one of the same size.

What shed demolition costs around the Treasure Valley

Here's what we quote most often. Access, what's stored inside, and what's under the shed will all move these around.

Shed type	Typical size	Demo + haul-away
Metal kit shed	8x10 to 10x12	$350 – $600
Resin/plastic shed	7x7 to 8x10	$300 – $500
Wood-framed shed	10x12	$550 – $900
Large wood shed or shop	12x20+	$1,100 – $2,200

Resin sheds are the cheap ones, and honestly they're the closest thing to a DIY win on this list. Old plastic gets brittle in our sun, so the panels crack apart under hand pressure. If a neighbor with a pickup owes you a favor, that's the job to spend it on.

Those wood numbers assume the shed is empty. It almost never is. Show us a shed packed with paint cans, a dead lawnmower, and twelve years of yard tools and that changes both the time and the price, which is why we wrote a whole piece on how to clear it out first. Anything in there that still works is worth a run to Idaho Youth Ranch before we ever show up.

What pushes the price up on either kind

Material sets the baseline. These are the things that move it:

Backyard access. A gate under 36 inches means every piece gets hand-carried to the front. Add an hour, easy.
A concrete slab underneath. Breaking and hauling a 4-inch slab is its own job, and we cover what to do with the slab separately.
Buried anchors and auger stakes. Common on metal sheds out toward Kuna and Star, where the wind actually gets going.
Power or water run out to the shed. That gets dealt with before anything comes down.

One more that catches people off guard: what's living under the floor. Rodent nests, wasps up in the eaves, a puddle of old motor oil soaked into the dirt. We've found all three. None of it stops a job, but you want to know about it before you get a number.

I'll be straight with you. A small metal or resin shed is genuinely doable on your own if you own a few tools and have a way to haul the pieces. A wood shed with a rotted floor is where most weekend projects go sideways, and where our shed demolition crew actually earns the money.

Bottom line

Metal comes apart fast and pays a little back on the scrap side. Wood is slower, heavier, and mostly landfill. Figure a couple hundred more for a wood shed of the same footprint, and expect access and slab work to matter more than either one.

Want a real number instead of a range? Send over a couple photos or call us at (208) 593-2877. We'll tell you what it'd run and whether it's worth doing yourself. Either answer is fine with us. If you'd rather read up first, here's how we handle shed demolition from the first panel to the last load.