Junk Removal

How to Cut Up a Hot Tub or Spa for Removal in Boise

By , owner of Top Shelf Junk Removal and Demolition · Updated

Learn how to cut up a hot tub safely: draining, power shutoff, the order of cuts, tools and gear, where the pieces go in Boise, and when to hire help.

Cut-up hot tub shell sections and wooden cabinet panels stacked on a backyard patio in Boise, Idaho, ready for removal

How to cut up a hot tub comes down to three jobs: get the water and power out, strip off the panels and parts, then saw the shell and frame into pieces you can carry. It's doable, but it's slower and messier than it looks.

A lot of DIY hot tub jobs stall at the same point: about halfway through cutting it up. That's the part of DIY hot tub removal in Boise nobody warns you about. By then there's a saw lying in the grass, yellow foam blowing across the yard, and a half-gutted spa that isn't going anywhere.

Can you do it yourself? Yes, and plenty of people handle their own hot tub removal. Just know what you're getting into before you start removing the first cabinet panel.

How to cut up a hot tub for removal

What's actually inside a hot tub

From the outside, a hot tub looks like a big plastic box. Inside, it's built in layers.

The acrylic shell you sit in has fiberglass behind it. Behind that is a thick layer of expanding spray foam, and sometimes it fills the whole cavity. Then you've got a wood or steel frame, the cabinet panels, a pump, a heater, a control box, and a tangle of PVC plumbing glued into all of it.

Tub shells are built to hold a lot of water and people, so they're tougher than they look. Some spa frames are wood, and some use metal framing, which needs a metal-cutting blade.

Even empty, a hot tub is heavy, and how heavy depends on its size, the frame, and how much foam is packed inside. Unless you've got four strong friends and a wide, clear path to the driveway, you're not moving it in one piece. That's why most DIY jobs turn into cutting jobs.

Drain, disconnect, and unplug it first

Drain it a day ahead. Most hot tubs have a drain spout that takes a garden hose, and a submersible pump moves the water out faster. Check your city's rules before sending treated water into the street, since it can reach local creeks.

To take apart a hot tub safely, shut the breaker off at the panel. If it's a plug-in model, unplug your tub. Many hot tubs are hardwired to a GFCI disconnect box within sight of the spa, so switch that off too, or call an electrician if you're unsure.

Test that the power is actually dead before you cut anywhere near the control box. Most hot tubs run on 240 volts, so don't guess on this one.

How DIY hot tub removal usually goes

With the tub empty and the power off, most people take a hot tub apart in this order, one step at a time:

  1. Pull off the cabinet panels
  2. Cut out the pump, heater, and control pack
  3. Cut the shell into sections with a reciprocating saw
  4. Scrape and bag the foam as you go
  5. Break the frame down into pieces you can carry
  6. Load it all up and haul it off

It looks tidy on paper. In real life, the foam gums up your blades, fiberglass dust gets on everything, and the shell pieces come off with sharp, awkward edges.

It takes longer than most people plan for. The size of the hot tub, how much foam is packed in, your tools, and whether you have help all change how long you'll be at it.

Heads up: Fiberglass dust itches like crazy, and you don't want it in your lungs. Wear a real respirator (N95 at minimum, P100 is better), safety glasses, gloves, and long sleeves you don't mind tossing. Start on a calm morning, too, since Boise's afternoon wind will carry that foam straight into your neighbor's yard.

How to cut it in half or work in sections

Most hot tub how-to guides skip the hard part: the shell. The easiest way is to work in sections. Cut straight down from the top lip, then make a second cut beside it so a strip comes free.

To cut the hot tub in half instead, saw across the middle and cut all vertical supports along that line. Once it's split into a front and back half, you should be able to tip each piece onto a dolly with a helper.

Fiberglass tubs cut cleanly with a fine-tooth blade. The foam is what slows you down, so bag it as you go. Removing it in chunks beats chasing it across the yard.

How hard is it to cut up a hot tub yourself?

Taking apart a hot tub is more tiring than tricky, so ask yourself two honest questions first. Have I used a reciprocating saw for more than a few quick cuts? Have I used one bent over in the hot sun, in a respirator, for hours?

What it really costs to do it yourself

Doing it yourself feels free until you add it up. You'll need demolition blades (foam and metal frames wear them out fast), a respirator and gloves, a trailer rental if you don't own one, and a landfill or disposal fee, which often goes up with weight. A heavier, foam-packed tub can cost more to drop off.

If you hire a local junk removal service for hot tub removal in Boise, Meridian, or Nampa, many price it by how much truck space it takes. Where it lands depends on the size of the hot tub and how hard it is to get to. Ask any service you call what's included, like loading, cleanup, and disposal fees.

When DIY hot tub removal makes sense

If you've got a truck and trailer, a good saw, a free Saturday, and a hot tub sitting on an open patio, you'll save a little money and can likely handle it.

It gets harder when the hot tub is behind a narrow side yard, up on a raised deck, or built right into the deck framing. Same goes if you're working alone, don't have a trailer, or have a bad back.

What is the best way to get rid of an old hot tub?

If your old hot tub still heats and holds water, sell it or give it away. A buyer looking for a used spa may come remove it whole, which saves you from removing it piece by piece. If it's dead, you've got three choices:

  • Cut and haul it yourself. Lowest cash cost, most sweat.
  • Rent a trailer and bring help. Fewer trips, same labor.
  • Hire a junk removal service. A crew will dismantle the tub, load it, and clean up the foam.

Access often decides it. Removal from an open patio is a quick haul, and removing one from behind a fence means a lot more carrying.

Where all the pieces end up: tub disposal options

Your hot tub disposal options are the landfill, a scrap yard, or a junk removal pickup service. The shell, foam, and panels are bulky landfill material.

In Ada County, that means a trip to the Ada County Landfill out on Seaman Gulch Road. If you live in Nampa or Caldwell, you'll be driving out to Pickles Butte. Call the local facility ahead for current hours and disposal fees.

Start by removing the metal parts. The pump motor and heater have copper and steel in them, and scrap yards like Western Recycling may take them. Call ahead to check what they accept.

Donating isn't really an option. Local thrift stores like Idaho Youth Ranch generally don't take hot tubs, whole or in pieces.

The hot tub cover goes to the landfill too. Its foam soaks up water over the years, so expect it to be a lot heavier than it looks.

Good to know: If the hot tub is part of a bigger backyard cleanout, a junk removal crew can often haul it with the rest of the cleanout.

Bottom line: You can take out a hot tub yourself. Just plan on a dusty project that takes longer than you'd guess. If you have the tools and an easy-to-reach tub, go for it.

Top Shelf Junk Removal and Demolition offers hot tub removal as a service across the Treasure Valley. We cut it apart or take it out whole, load every piece, sweep up the foam, and haul it off. Call or text us at (208) 593-2877, and we'll come out for a free estimate and give you a firm price before anything gets touched. No pressure either way.

Frequently asked questions

How long does draining take?

It depends on how big your spa is and what you use. A garden hose on the spout is slow, and a submersible pump is much faster.

What do I do with the cover?

Slice the vinyl with a utility knife, pull out the foam panels, and bag it all for disposal. Let a soaked cover dry first so it's lighter.

Is it easier to dismantle it or remove it whole?

Taking it out whole is quicker if it fits through your gate and you have enough people to lift it. If not, sawing it into sections is the way out.

Do I need a rental trailer?

Related reading: Junk Removal Boise Prices: What Your Quote Actually Includes and How to Dispose of an Old Lawn Mower and Grill: Boise Disposal Guide.

Only if you don't own a truck or trailer. If you go with a rental, size it for the shell pieces, frame, and bagged foam, or let a junk removal service bring the truck.

hot tub removaldiyboisejunk removalspa disposal

Need Help With Hot Tub Removal?

Top Shelf serves Boise and the Treasure Valley with professional junk removal, cleanouts, and demolition services.

Add photos (optional - helps with accurate quotes)

0/10 photos added

Website byReview Monster - website design and digital marketing